Tripp Lite HDMI Over Cat6 Extender Kit Transmitter Receiver Repeater 4K60Hz

$190.89

SKU 00916B127A-111-BHTH Category

Tripp Lite HDMI Over Cat6 Extender Kit Transmitter Receiver Repeater 4K60Hz – 2 Input Device – 3 Output Device – 230 ft Range – 2 x Network (RJ-45) – 1 x HDMI In – 1 x HDMI Out – 4K UHD – 3840 x 2160 – Twisted Pair – Category 6 – Wall Mountable, Rack-mountable – TAA Compliant

2 Input Device – 3 Output Device – 230 ft Range – 2 x Network (RJ-45) – 1 x HDMI In – 1 x HDMI Out – 4K UHD – 3840 x 2160 – Twisted Pair – Category 6 – Wall Mountable, Rack-mountable – TAA Compliant

Brand Name

Tripp Lite

Connectivity Technology

Wired

Country of Origin

Taiwan

Environmental Certification

RoHS

Environmentally Friendly

Yes

Form Factor

Wall Mountable

Graphics Modes

4K UHD

HDMI In

Yes

HDMI Out

Yes

Limited Warranty

1 Year

Manufacturer

Tripp Lite by Eaton

Manufacturer Part Number

B127A-111-BHTH

Manufacturer Website Address

http://www.tripplite.com

Marketing Information

Features

HDMI Extender Kit Ideal for Digital Signage in Schools, Restaurants and Lecture Halls
This complete transmitter and transceiver system is recommended for video presentations in conference rooms, schools, trade shows, meeting facilities, houses of worship, retail settings, hotels and other digital signage applications where the source and display are farther apart than conventional A/V cables allow. The B127A-111-BHTH extends 4K signals from an HDMI source device to an HDMI display up to 230 feet away via user-supplied Cat6 cabling. IR remote control lets you operate the source from the display end of the installation.

Transmits Crystal-Clear 4K Video with Multi-Channel Audio, HDR and 4:4:4 Color
The B127A-111-BHTH supports Ultra HD resolutions up to 3840 x 2160 (4K x 2K) at 60 Hz, as specified by HDMI 2.0, with full, rich uncompressed DTS-HD, Dolby TrueHD and 7.1-channel digital audio. High Dynamic Range (HDR) provides a wide range of vibrant colors with richer contrast, brighter whites and deeper blacks that pop on your 4K display. HDCP 2.2 compliance allows you to stream 4K Amazon and Netflix content with no complications. This extender kit also supports 4:4:4 chroma subsampling for top-level PC gaming or using your HDTV as a PC monitor. Built-in equalization allows you to fine-tune the image quality at the remote display.

Local HDMI Port on Transmitter Supports 4K @ 60 Hz Resolution
To monitor the video signal being extended to the transceiver, connect a 4K display to the transmitter's local HDMI port with a user-supplied HDMI cable. This port does not support multi-resolution capabilities, so the connected monitor must also support 4K/60 Hz to function properly.

Built-In PoC Technology Provides Transceiver Power to Avoid Bulky External Power Bricks
Power over Cable (PoC) technology powers the transceiver over Cat6 cable. LEDs on both the transmitter and transceiver will light up to indicate the system is receiving power and a signal is being transmitted. PoC lets you avoid the hassle of a bulky power brick and gives you the freedom to place the transceiver where needed without worrying about finding a nearby AC outlet.

Create a Daisy Chain to Achieve Even More Distance
This extender kit is capable of forming daisy-chain installations up to 920 feet from the transmitter by connecting additional B127A-110-BH transceivers (sold separately). Up to four total B127A-110-BH transceivers can be chained together, each capable of extending a 4K/60 Hz signal up to 230 feet per unit. The transceiver is also compatible with Tripp Lite's B127A-010-H signal booster (sold separately), which allows the signal to be boosted up to 400 feet total between the transmitter and transceiver. When used in a daisy-chain installation, this brings the total extension distance up to 1,090 ft. Note: B127A-010-H will only work when used in the first link of the daisy-chain installation.

Plug-and-Play Operation for Quick Setup and Immediate Use
The included transmitter and transceiver units work right out of the box with no software required. Mounting hardware is included for installing the transmitter on a wall, pole or 19-inch rack. Connect the transmitter to the source with a user-supplied HDMI cable (such as Tripp Lite's P568- or P569-Series). Then, connect the transceiver to the display with another user-supplied HDMI cable. Finally, connect the two units with user-supplied Cat6 patch cable (such as Tripp Lite N202-Series cable).

Maximum Operating Distance

230 ft

Maximum Video Resolution

3840 x 2160

Media Type Supported

Twisted Pair

Network (RJ-45)

Yes

Number of HDMI Inputs

1

Number of HDMI Outputs

1

Number of Input Devices Supported

2

Number of Network (RJ-45) Ports

2

Number of Output Devices Supported

3

Package Contents

  • 1 x Transmitter
  • 1 x Transceiver
  • External power supply (Input: 100-240V, 50/60 Hz, 0.6A; Output: 24V 1A)
  • 4 x International plug adapters (North America, Europe, U.K. and Australia)
  • IR-In cable
  • IR-Out cable
  • Mounting Hardware
  • Owner's Manual

Product Name

Video Extender Transmitter/Receiver

Product Type

Video Extender Transmitter/Receiver

Receiver Depth

1.06"

Receiver Height

4.53"

Receiver Weight (Approximate)

15.98 oz

Receiver Width

2.46"

TAA Compliant

Yes

Transmitter Depth

1.06"

Transmitter Height

4.53"

Transmitter Weight (Approximate)

15.98 oz

Transmitter Width

2.46"

Twisted Pair Cable Standard

Category 6

Reviews

There are no reviews yet.

Be the first to review “Tripp Lite HDMI Over Cat6 Extender Kit Transmitter Receiver Repeater 4K60Hz”

Your email address will not be published. Required fields are marked *