Tripp Lite UPS SmartPro Lithium Battery Backup – 120V 1kVA 800W Line In

$1,484.68

SKU 17631SMART1000RM2UL Category

Tripp Lite UPS SmartPro Lithium Battery Backup – 120V 1kVA 800W Line In – 2U Rack/Tower – AVR – 2.70 Hour Recharge – 8.30 Minute Stand-by – 120 V AC Input – 120 V AC Output – 6 x NEMA 5-15R

2U Rack/Tower – AVR – 2.70 Hour Recharge – 8.30 Minute Stand-by – 120 V AC Input – 120 V AC Output – 6 x NEMA 5-15R

Alarm

UPS Fault

Application/Usage

Telecommunication

AVR

Yes

Backup/Run Time (Full Load)

8.30 Minute

Backup/Run Time (Half Load)

20 Minute

Battery Chemistry

Lithium Iron Phosphate (LiFePO4)

Brand Name

Tripp Lite

Country of Origin

China

Depth

12.5"

EMI/RFI Noise Filter

Yes

Environmental Certification

RoHS

Environmentally Friendly

Yes

EPO Port

Yes

Form Factor

Rack/Tower

Height

3.5"

Input Voltage

120 V AC

Input Voltage Range

83 V AC – 147 V AC

Limited Warranty

5 Year

Load Capacity

1000 VA/800 W

Load Capacity (VA)

1000 VA

Load Capacity (W)

800 W

Manufacturer

Tripp Lite by Eaton

Manufacturer Part Number

SMART1000RM2UL

Manufacturer Website Address

http://www.tripplite.com

Marketing Information

Reliable LiFePO4 Battery Backup Offers Longer Life and Less Weight than Lead Acid Battery

This Tripp Lite SmartPro® UPS lithium battery backup features a state-of-the-art lithium iron phosphate (LiFePO4) internal battery with longer life, more cycles and faster recharge. It more than doubles the service life of an equivalent lead acid battery, and offers up to three times more charge/discharge cycles. It recharges to 100% capacity in less than three hours, making the lithium UPS system an ideal backup in case of power outage. The LiFePO4 battery has 60% the weight of an equivalent lead acid battery, which reduces the overall UPS weight.

120-Volt Battery Backup Keeps Equipment Operating Through Short Power Failures

The SMART1000RM2UL provides up to 20 minutes (half load) and 8.3 minutes (full load) of battery backup, as well as AC power protection, for critical server, network and telecom equipment. In case of a prolonged blackout, the single-phase lithium UPS system gives you enough time to save important data and perform an orderly system shutdown.

Automatic Voltage Regulation (AVR) Conserves Battery Power

With an 800W capacity (1000VA), the line-interactive UPS system with automatic voltage regulation (AVR) maintains regulated 120V nominal output over an input range of 83V-147V without using battery power. Conserving power allows your LiFePO4 battery to last longer and maintain full capacity until needed.

6 Outlets Protect Your Mission-Critical Rack Equipment

Plug your equipment into the six NEMA 5-15R outlets. Four outlets are split into two dual-outlet load banks that are switchable via network interface. These four outlets let you power connected equipment on and off remotely to reset or reboot connected equipment or to shed less significant loads to extend battery runtime for more critical equipment. All six outlets are protected by 570-joule network-grade surge protection to fight off damaging power surges and spikes.

Premium Protection from EMI/RFI Line Noise Helps Your Equipment Perform Better

This UPS system filters out disruptive electromagnetic and radio frequency interference that can inflict hardware damage or data loss. This EMI/RFI filtering also helps your connected components perform better and last longer.

High Efficiency Helps the Environment and Your Cash Flow

Operating with a high 95% line-mode efficiency, the 1kVA UPS system can save BTU heat output and energy costs.

Advanced Communications Ports Connect to Any Workstation or Server

USB and DB9 ports (cables are included) enable data-saving unattended shutdown when used with Tripp Lite's free downloadable PowerAlert® software. Capabilities include detailed monitoring of equipment load levels, self-test data and utility power condition. The Emergency Power Off (EPO) interface offers options for instantaneous power-off of the UPS system and connected equipment in case of fire or other facility emergency.

Optional Network Management Cards Allow Detailed Monitoring of Conditions

The SMART1000RM2UL is compatible with Tripp Lite network management cards, such as WEBCARDLX, for detailed monitoring of UPS and site power conditions.

Maximum Operating Temperature

104°F (40°C)

Output Frequency

60 Hz

Output Voltage

120 V AC

Package Contents

  • SmartPro SMART1000RM2UL 1kVA Rack/Tower UPS
  • USB Cable
  • DB9 Cable
  • EPO Cable
  • Rack-Mounting Hardware
  • Owner's Manual

Plug/Connector Type

NEMA 5-15P

Product Family

SmartPro

Product Line

SmartPro

Product Model

SMART1000RM2UL

Product Name

SmartPro SMART1000RM2UL 1kVA Rack/Tower UPS

Product Type

Line-interactive UPS

Rack Height

2U

Receptacle Detail

6 x NEMA 5-15R

Receptacle Type

NEMA 5-15R

Serial Port

Yes

Sound Emission (A-Weighted)

45.5 dB(A)

Status Indicators

  • Multi-Function LCD
  • Audible Alarms

Storage Relative Humidity

95%

Storage Temperature

5°F (-15°C) – 122°F (50°C)

Surge Energy Rating

570 J

Thermal Dissipation

41.32 W

Transfer Time

4 ms

Typical Battery Recharge Time

2.70 Hour

USB (HID Compliant) Port

Yes

Waveform Type

Pure Sine Wave

Weight (Approximate)

16.30 lb

Width

17.4"

Reviews

There are no reviews yet.

Be the first to review “Tripp Lite UPS SmartPro Lithium Battery Backup – 120V 1kVA 800W Line In”

Your email address will not be published. Required fields are marked *