Cisco Aironet PoE Injector

120 V AC, 230 V AC Input – 55 V DC, 2 A Output – 1 x Ethernet Input Port(s) – 1 x Ethernet Output Port(s) – 60 W – Pole/Wall-mountable

Brand Name	Cisco
Certifications & Standards	CE IEEE 802.3af IEEE 802.3at FCC Part 15, Class B CE, EN50522 Class B EN55024 VCCI EN61000-4-5 Class 5 (6kV CM) UL60950-1 UL60950-22 GS
Compatibility	Cisco Aironet 1560 Series Outdoor Access Points
Environmental Certification	WEEE
Environmentally Friendly	Yes
Height	2.8"
Input Ports	1 x Ethernet
Input Voltage	230 V AC
Length	8.4"
Limited Warranty	90 Day
Manufacturer	Cisco Systems, Inc
Manufacturer Part Number	AIRPWRINJ60RGD1-RF
Manufacturer Website Address	http://www.cisco.com
Marketing Information	The power injector increases wireless LAN deployment flexibility of the access point by combining 55-VDC power with the data signal, and sending both to the connected access point. The power injector combines 55-VDC power (supplied by internal power supply) with the data signal, sending both to the access point. The power injector provides up to 60 W over all four wire pairs of shielded, outdoor rated Ethernet cable. The total length of the Ethernet cable from the AP to the switch must not exceed 320 ft (100 m). The wire gauge of the cable must be 26 AWG. The Ethernet cable from the switch to the power injector must be a shielded CAT5e or higher Ethernet cable. The Ethernet cable from the power injector to the access point must be a shielded outdoor-rated CAT5e or higher Ethernet cable with a 0.20 to 0.35 inch diameter.
Maximum Output Current	2 A
Maximum Output Power	60 W
Maximum Output Voltage	55 V DC
Mount Type	Pole/Wall-mountable
Output Ports	1 x Ethernet
Product Condition	Refurbished
Product Line	Aironet
Product Name	Aironet PoE Injector
Product Type	PoE Injector
Protection Type	Surge Protection
Weight (Approximate)	2.98 lb
Width	5.9"