IOGEAR HDBaseT HDMI Extender

$197.35

SKU 00434GVE330 Category

IOGEAR HDBaseT HDMI Extender – 1 Input Device – 1 Output Device – 229.66 ft Range – 2 x Network (RJ-45) – 1 x HDMI In – 1 x HDMI Out – 4K – 3840 x 2160 – Twisted Pair – Category 6a – Rack-mountable

1 Input Device – 1 Output Device – 229.66 ft Range – 2 x Network (RJ-45) – 1 x HDMI In – 1 x HDMI Out – 4K – 3840 x 2160 – Twisted Pair – Category 6a – Rack-mountable

Brand Name

IOGEAR

Connectivity Technology

Wired

Country of Origin

Taiwan

Environmental Certification

WEEE

Environmentally Friendly

Yes

Form Factor

Rack-mountable

Graphics Modes

4K

HDMI In

Yes

HDMI Out

Yes

Limited Warranty

3 Year

Manufacturer

IOGEAR, Inc

Manufacturer Part Number

GVE330

Manufacturer Website Address

http://www.iogear.com

Marketing Information

HDMI Extender over Ethernet

On average, traditional HDMI cables have distance limitations of transmitting an HDMI signal longer than 25ft. With IOGEAR's HDBaseT HDMI Extender Kit, HDMI audio and video signals can be transmitted up to 228ft using a single solid Cat6a cable. The HDMI extender kit consists of a local transmitter unit and remote receiver unit connected using a single solid Ethernet cable. This HDMI extender kit provides a low-cost and reliable solution of distributing HDMI over long distances that traditional cables are unable to address. Using existing Cat5e/Cat6/Cat6a infrastructure, HDBaseT technology allows for single cable installation avoiding the hassle of running multiple cables and reducing potential failure points. This plug-n-play solution is compatible with any operating system and requires no additional drivers or software.

What is HDBaseT?

HDBaseT is a consumer electronic and connectivity standard that's revolutionizing HDMI distribution. HDBaseT uses an advanced method of modulation that enables the transmission of uncompressed multimedia content at resolutions up to 4K (UHD). The HDBaseT architecture allows for a full bandwidth of 10.2Gbps data throughput over a single Cat 5e/Cat6/Cat6a cable and supports all High Speed HDMI functions including high-definition video, audio, power, 100BaseT Ethernet, USB, and certain control signals such as CEC, RS-232 or IR.

Astonishing Picture Quality at Long Distances

With the A/V industry quickly adopting 4K (UHD) as the new high-resolution video standard, long range video distribution can be a challenge with standard HDMI cables that experience signal degradation at 25 feet. Using IOGEAR's HDBaseT HDMI Extender and a single Cat6a cable, transmit HDMI signals at distances up to 228ft (70m) at 1080p resolution. Be amazed at how 4K UHD (3840×2160) picture quality, four times the resolution of high-definition 1080p, can be maintained even at 130ft (40m) away from your video source using Cat6a cable. This HDMI extender kit can make any video source look great, while future proofing your setup for 4K implementation.

More from the Manufacturer

Maximum Operating Distance

229.66 ft

Maximum Video Resolution

3840 x 2160

Media Type Supported

Twisted Pair

Network (RJ-45)

Yes

Number of HDMI Inputs

1

Number of HDMI Outputs

1

Number of Input Devices Supported

1

Number of Network (RJ-45) Ports

2

Number of Output Devices Supported

1

Package Contents

  • 1 x HDBaseT HDMI Transmitter
  • 1 x HDBaseT HDMI Receiver
  • 2 x Locking Power Adapters
  • 2 x Wall Mount Kits
  • 1 x Quick Start Guide
  • 1 x Warranty Card

Product Name

HDBaseT HDMI Extender

Product Type

Video Extender Transmitter/Receiver

Receiver Depth

1.19"

Receiver Height

2.62"

Receiver Weight (Approximate)

8.47 oz

Receiver Width

4"

Transmitter Depth

1.19"

Transmitter Height

2.62"

Transmitter Weight (Approximate)

8.47 oz

Transmitter Width

4"

Twisted Pair Cable Standard

Category 6a

Reviews

There are no reviews yet.

Be the first to review “IOGEAR HDBaseT HDMI Extender”

Your email address will not be published. Required fields are marked *